BeamBracket
BeamBracket is a rugged, 3D-printed mount that adds one or two torches to your Wimberley M-6 Extension Post. It creates a streamlined lighting setup for night photography — more reach, better alignment, and fewer missed frames. For off-camera flash flexibility, check out the BeamMount.
The BeamBracket expands your Wimberley flash bracket with dual torch capacity. By holding one or two hunting torches alongside your flash, it gives you both reach and flexibility: run dual beams for extra illumination, pair red with white for lower subject impact and clear ID, or add a high-CRI torch for videography.
BeamBracket is designed to mount to the Wimberley M-6 Extension Post. It physically fits the M-9 Wimberley Head Version II Module and Module 2 - M-2 Upright but mounting to these directly will not leave enough clearance for larger lenses.
BeamBracket keeps everything locked to your Wimberley setup — lightweight, rugged, and field-tested for reliable performance. If you need more versatility, the BeamMount is a better choice for off camera use, opening up a wider range of lighting setups.
What’s Included
1 × 3D-printed BeamBracket (Wimberley flash bracket interface + dual 25 mm torch slots)
What You’ll Need
A compatible Wimberley flash bracket
One or two hunting-style torches with:
Standard 25 mm body diameter (±0.5 mm)
≥30 mm straight clamp zone (no tapers, flares, or fins)
≤45 mm maximum diameter
Optional) Radio trigger for off-camera flash use
Key Benefits
Dual Torch Mounts – Extra reach, colour mixing, or redundancy in the field.
Bracket Integration – Built for Wimberley flash brackets.
Perfect alignment – Keeps torches and flash locked in alignment.
Low-Impact Aiming – Faster setups with less stress on wildlife - point and shoot!
Rugged & Reliable – Lightweight ABS build, tested in real field conditions.
Tech Specs
Spec | Detail |
|---|---|
Material | 3D-printed ABS (black, semi-gloss finish) |
Torch Fit | Standard 25 mm hunting torches |
Mounting | Fits:
Mounting directly to a flash bracket without an extension will typically not leave enough clearance for large lenses. |
Weight | ~20 g |
Made in | Australia, by TalonFab |
Safety & Use
BeamBracket is designed for use with compatible Wimberley flash brackets and torches only. Ensure your torches fit the specified diameter and clamp zone before installation. Do not overload the mount or force incompatible torches into the slots. Always confirm the bracket and your gear is and check fittings regularly when working in the field.