BeamMount Binocular

Name: BeamMount Binocular-1/4in UNC
Brand: TalonFab
SKU: TF-FL-BBM-14UNC-ABS-V1
Price: 29.0 AUD
Availability: InStock

Write a review

$29.00

BeamMount Binocular is a lightweight, 3D-printed bracket that aligns a standard 25.4 mm (1 in) hunting torch precisely with the optical axis of your binoculars. It mounts directly to the bridge of most binoculars with a standard ¼-inch UNC (20 tpi) thread (often under a rubber cap), providing stable, hands-free illumination for night wildlife observation without disturbing your view or balance.

Designed for wildlife observers, researchers, and naturalists, it lets you scan, track and identify subjects seamlessly under consistent beam alignment - no extra hands or awkward headlamps required.

Mount Option

Quantity

Add to Cart

Product Details

This mount brings the BeamMount philosophy - precise alignment and field reliability - to the world of binoculars. It locks a torch securely to your optics, creating an intuitive, point-where-you-look lighting setup ideal for spotting nocturnal birds, mammals or amphibians. The ABS construction balances strength with light weight, and its direct-mount design means no straps, tapes or bulky adapters. Combine with a head torch or thermal camera for spotting subjects, then use BeamMount Binocular to efficiently identify them.

Compatibility

BeamMount Binocular fits any binoculars with a ¼-inch UNC (20 tpi) bridge mount (common on tripod-adaptable binoculars).

Component	Fit Specification
Bridge Diameter (with thumb screw)	≥ 28 mm (thumbscrew)
Bridge Diameter (with hex bolt)	≥ 20 mm (hex head bolt only - requires tools)
Torch Body	25.4 mm (± 0.5 mm) cylindrical hunting torch
Minimum Torch Clamp Zone	≥ 30 mm straight section

Torch examples: UltraFire WF-501B / WF-502B, Wolf Eyes XBeam, and similar.

Key Benefits

Perfect Alignment – Beam axis tracks precisely with your binocular view.
Hands-Free Illumination – Keep both hands steady while scanning or focusing.
Quick Setup – Attaches directly via the included thumb screw in seconds.
Lightweight & Balanced – Minimal impact on handling or fatigue.
Tool-Optional Design – Swap between thumb screw and hex bolt depending on clearance and preference.

What’s Included

1 × 3D-printed BeamMount Binocular bracket (with integrated torch clamp)
1 × ¼-inch UNC thumb screw (installed)
1 × hex-head bolt (optional for narrow mounts)

Tech Specs

Spec	Detail
Material	3D-printed ABS body, Carbon Fibre Nylon and 316 stainless steel thumbscrew
Torch Fit	25.4 mm standard hunting torches
Binocular Mount	¼-inch UNC (20 tpi) bridge mount
Weight	≈ 45 g
Dimensions	Approx. 62 × 30 × 30 mm
Made in	Australia by TalonFab

Safety & Use

BeamMount Binocular is designed for a snug, vibration-resistant fit. Avoid over-tightening the thumb screw - firm contact is sufficient for stability. If using hex-bolt option, take care not to exceed finger-tight torque with tools, as excessive force may damage the mount or binocular housing. Always confirm your torch beam clears the binocular barrels before use.