Spare Handle and Microphone Mount Assembly for Parabolic Microphone 580

Pre-order - Expected to ship mid August

A complete replacement handle, microphone support and mounting assembly for the TalonFab Parabolic Microphone 580.

This assembly replaces the central structural components used to hold, aim and mount the microphone. It includes the integrated carrying handle, microphone boom arm and microphone holder, together with the base and rear accessory mounting points.

The microphone support positions a compatible lavalier microphone at the acoustic focus of the reflector. The microphone sits recessed below the rim of the dish, helping shield it from direct wind while maintaining the correct position relative to the reflector.

The integrated handle provides a stable grip for handheld recording. A 1/4-20 female mounting point underneath allows the completed microphone to be attached to a suitably rated tripod, while the rear 1/4-20 accessory mount can support a compatible phone holder, audio recorder or mounting adapter.

Microphone-specific variants are available for:

• RØDE Lavalier GO
• Deity W.Lav Pro

Select the variant matching the microphone you intend to use.

What’s Included

• 1 × Integrated handle and structural mounting assembly
• 1 × Microphone boom arm
• 1 × Microphone mount for the selected microphone variant
• 1 × Base 1/4-20 female tripod mounting point
• 1 × Rear 1/4-20 accessory mounting bolt

Compatibility

Designed exclusively for the TalonFab Parabolic Microphone 580.

The assembly is intended to be installed through the dedicated microphone-opening quadrant and connected to the remaining dish structure using the original mounting arrangement.

Microphones, audio recorders, phone holders and recorder adapters are not included.

Installation

Partial disassembly of the reflector is required to remove and replace the handle assembly.

Install all components loosely before final tightening and confirm that the microphone support is seated correctly at the centre of the reflector. Avoid overtightening fasteners or threaded inserts.

Before each use, confirm that the handle, dish quadrants, microphone mount, tripod connection and any attached recording equipment are secure.